8266-power-ntfy/v2.ino

#include <ESP8266WiFi.h>
#include <ESP8266HTTPClient.h>
#include <WiFiClientSecureBearSSL.h>   // <-- Use BearSSL client

// ---------- Wi-Fi ----------
const char* ssid     = "SSIDHERE";
const char* password = "PASSWORDHERE";

// ---------- ntfy ----------
const String ntfyServerUrl = "https://ntfy.sh/TOPIC";

// ---------- Healthchecks.io ----------
const char* HC_URL       = "https://hc-ping.com/xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx";
const unsigned long PING_INTERVAL = 5UL * 60UL * 1000UL; // 5 minutes

// ---------- Hardware ----------
const int powerStatusPin = 5;   // D1 – optocoupler
const int ledPin         = 2;   // Built-in blue LED (active-low)

// ---------- State ----------
bool previousPowerStatus = false;
unsigned long lastPing   = 0;

BearSSL::WiFiClientSecure wifiClient;   // Secure client for both ntfy & HC

void setup() {
  Serial.begin(115200);
  pinMode(powerStatusPin, INPUT_PULLUP);
  pinMode(ledPin, OUTPUT);

  // ---- Wi-Fi ----
  WiFi.mode(WIFI_STA);
  WiFi.begin(ssid, password);
  Serial.print(F("Connecting to Wi-Fi"));
  while (WiFi.status() != WL_CONNECTED) {
    delay(500);
    Serial.print('.');
  }
  Serial.println();
  Serial.println(F("Connected! IP: "));
  Serial.println(WiFi.localIP());

  // Allow insecure TLS (self-signed ntfy or HC certs) – remove in prod if you have proper certs
  wifiClient.setInsecure();

  // Optional: tell HC the check just started
  pingHealthchecks(String(HC_URL) + "/start");
}

void loop() {
  // ----- LED blink -----
  digitalWrite(ledPin, LOW);   delay(500);
  digitalWrite(ledPin, HIGH);  delay(500);

  // ----- Power monitoring -----
  bool current = digitalRead(powerStatusPin);
  if (current != previousPowerStatus) {
    if (current == LOW) {               // LOW = power ON
      Serial.println(F("Power Restored."));
      sendNotification("Power is on! Control MDF is back on mains power.");
    } else {
      Serial.println(F("Power Outage Detected!"));
      sendNotification("Power is off! Control MDF is on battery power.");
    }
    previousPowerStatus = current;
  }

  // ----- Healthchecks heartbeat -----
  unsigned long now = millis();
  if (now - lastPing >= PING_INTERVAL) {
    lastPing = now;
    pingHealthchecks(HC_URL);
  }

  delay(1000);   // debounce / loop pacing
}

// ---------------------------------------------------------------
// Send ntfy notification (unchanged, just uses the shared client)
// ---------------------------------------------------------------
void sendNotification(const String& message) {
  if (WiFi.status() != WL_CONNECTED) {
    Serial.println(F("Wi-Fi lost – cannot send ntfy"));
    return;
  }

  HTTPClient http;
  http.begin(wifiClient, ntfyServerUrl);
  http.addHeader("Content-Type", "text/plain");

  Serial.print(F("ntfy → "));
  Serial.println(message);

  int code = http.POST(message);
  Serial.print(F("ntfy response: "));
  Serial.println(code);

  http.end();
}

// ---------------------------------------------------------------
// Ping healthchecks.io – tiny HTTPS GET
// ---------------------------------------------------------------
void pingHealthchecks(const String& url) {
  if (WiFi.status() != WL_CONNECTED) {
    Serial.println(F("No Wi-Fi for HC ping"));
    return;
  }

  HTTPClient http;
  http.setTimeout(10000);               // 10 s timeout
  http.begin(wifiClient, url);          // HTTPS

  Serial.print(F("HC ping → "));
  Serial.println(url);

  int code = http.GET();
  if (code > 0) {
    Serial.printf("HC OK (code %d)\n", code);
  } else {
    Serial.printf("HC failed: %s\n", http.errorToString(code).c_str());
  }
  http.end();
}